Hvis du har problemer med at få dit print til at sidde fats på dit bed, skal du prøve Dimafix.
Den er meget drøj i brug, så der er til de næste maaaaaange print i sådan en spray.
Good adhesion of your print to the printbed is a must in 3D printing! In order to keep your object fixed during printing and avoid warping, there is now DimaFix. DimaFix is a new aerosol spray adhesive for 3D printers with a heated printbed, which prevents warping of large-scale objects.
Dimafix is an adhesive aerosol spray that offers a strong bond between the first layer and the build plate when the bed is heated above 60ºC. Below 60ºC DimaFix becomes inactive, so prints can easily be removed from the build plate. DimaFix - Fixative spray provides a strong bond between glass and plastic that is easy to break when needed. The adhesive spray is completely water soluble, so cleaning the build plate is an easy process.
Different print bed temperature results in different levels of adhesion:
Below 60ºC: No adhesion, the objects can be detached from the plate.
60 - 75ºC: Average adherence, for simple geometries.
75 - 95ºC: High adherence, for complex geometries and lengthy prints.
Above 95ºC: Very high adherence, for very complex geometries and very lengthy prints.